Call 08046068033 62% Response Rate

Send Email

Reverse Laminar Air Flow

Our product range includes a wide range of reverse laminar air flow cabinets, reverse laminar air flow unit, reverse laminar air flow workstations, reverse laminar air flow bench, reverse laminar flow and reverse laminar flow booth.
Reverse  Laminar Air  Flow Cabinets

Reverse Laminar Air Flow Cabinets

Get Latest Price

Product Details:
BrandTHE MALHAAR
Surface FinishPolished
TypeHepa Filter
MaterialSS 304
Air Velocity90 +- 20 cfm (Average)
Voltage230 V
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. Ideally used formixed airflow stream to control the hazardous mission of dust powder during dispensing or sampling process.This ensures to draw powder aerosols away from the operator and the operating environment protectingproducts and providing safe working condition for personnel.
Get Best QuoteRequest A Callback
Reverse  Laminar Air Flow Unit
  • Reverse  Laminar Air Flow Unit
  • Reverse  Laminar Air Flow Unit
  • Reverse  Laminar Air Flow Unit

Reverse Laminar Air Flow Unit

Get Latest Price

Product Details:
BrandTHE MALHAAR
TypeHepa Filter
Surface FinishPolished
MaterialSS 304
Air FlowRe-Circulating Laminar Air Flow
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationLaboratory
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Noise Level>65db
Automation GradeSS 304
Lighting TypeLED FITTING
Power230V
MOCStainless Steel
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Electrical Supply V230 V
Filtration Capacity Microns0.3 Micron
Filtration GradeH14
Iso CertifiedYes
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Air CleanlinessISO 5 (CLASS 100)
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Reverse  Laminar Air  Flow Workstations

Reverse Laminar Air Flow Workstations

Get Latest Price

Product Details:
BrandTHE MALHAAR
TypeHepa Filter
Surface FinishPolished
MaterialSS 304
Air FlowRe-Circulating Laminar Air Flow
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationPharmaceutical Industry
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Noise Level>65db
Lighting TypeLED FITTING
Power230V
MOCStainless Steel
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Electrical Supply V230 V
Filtration Capacity Microns0.3 Micron
Filtration GradeH14
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Iso CertifiedYes
Air CleanlinessISO 5 (CLASS 100)
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Reverse  Laminar Air  Flow Bench

Reverse Laminar Air Flow Bench

Get Latest Price

Product Details:
BrandTHE MALHAAR
TypeHepa Filter
Surface FinishPolished
MaterialSS 304
Air FlowRe-Circulating Laminar Air Flow
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationLaboratory
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Automation GradeSS 304
Noise Level>65db
Lighting TypeLED FITTING
Power230V
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
MOCStainless Steel
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Electrical Supply V230 V
Filtration Capacity Microns0.3 Micron
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Iso CertifiedYes
Air CleanlinessISO 5 (CLASS 100)
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Reverse  Laminar  Flow

Reverse Laminar Flow

Get Latest Price

Product Details:
BrandTHE MALHAAR
Surface FinishPolished
Air FlowRe-Circulating Laminar Air Flow
MaterialSS 304
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationLaboratory
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Noise Level>65db
Automation GradeSS 304
Lighting TypeLED FITTING
Power230V
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
MOCStainless Steel
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Electrical Supply V230 V
Filtration Capacity Microns0.3 Micron
Filtration GradeH14
Iso CertifiedYes
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Air CleanlinessISO 5 (CLASS 100)
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Reverse  Laminar  Flow  Booth

Reverse Laminar Flow Booth

Get Latest Price

Product Details:
BrandTHE MALHAAR
TypeHepa Filter
Surface FinishPolished
MaterialSS 304
Air FlowRe-Circulating Laminar Air Flow
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationPharmaceutical Industry
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Noise Level>65db
Lighting TypeLED FITTING
Power230V
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
MOCStainless Steel
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Electrical Supply V230 V
Filtration Capacity Microns0.3 Micron
Filtration GradeH14
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Iso CertifiedYes
Air CleanlinessISO 5 (CLASS 100)
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Reverse  Laminar Air  Flow  Systems

Reverse Laminar Air Flow Systems

Get Latest Price

Product Details:
BrandTHE MALHAAR
TypeHepa Filter
Surface FinishPolished
MaterialSS 304
Air FlowRe-Circulating Laminar Air Flow
Model Name/NumberDispensing Booth
SizeCustomized
Efficiency99.999% down to 0.3 micron particles
Usage/ApplicationLaboratory
Voltage230 V
FeaturesFeather Touch ON/OFF Switch For Flourscent light & Motor ON/OFF Switch Socket 16 Amp,230 V
Noise Level>65db
Automation GradeSS 304
Lighting TypeLED FITTING
Power230V
IlluminationUV LIGHT 5-18 WATT WITH HOUR METER,FLOURSCENT LIGHT 5-18 WATT
MOCStainless Steel
Frequency50Hz
Working AreaSS 304 SHEET 1 MM THICK
Pressure GaugeMAGNEHLIC GAUGE 0-25MM
FiltrationHepa Filter 0.3 micron,Fine Filter 5 micron
Filtration Capacity Microns0.3 Micron
Filtration GradeH14
Motor Blower AssemblyDouble Shaft Motor Blower,1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Iso CertifiedYes
Air CleanlinessISO 5 (CLASS 100)
Power SupplyELECTRICAL SUPPLY 230V AC 1 - PHASE
Motor Capacity Kw1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Motor Rating1.0/0.5 H.P,2800 R.P.M,230 volt,1 Phase
Pre FilterFlange Type,Moc:Aluminium,Media:Non woven synthetic Polyester,Efficiency:90% down to 10 Micron,Grade
Voltage V230,1.0/0.5 HP,1400 / 2800 R.P.M,230 volt,1 Phase
Country of OriginMade in India
A Reverse Laminar Air Flow—also called a Dispensing Booth and Sampling BoothReverse Laminar Air Flow is designed to provide Class 100 working environment at rest with built inscavenging system to ensure product, operator as well as surrounding environment protection. The RLAF benchfinds Major application in sampling and dispending units. Ideally used for mixed airflow stream to control thehazardous mission of dust powder during dispensing or sampling process. This ensures to draw powder aerosolsaway from the operator and the operating environment protecting products and providing safe workingcondition for personnel.The system operates on a recirculatory airflow principle providing containment by air movement. The prefilters atthe base of the rear wall capture the airborne contaminants generated. ntake velocity at prefilters ensuringincreased scavenging effect. A small percentage of air is discharge from the blood through the bleed exhaust HEPAfilter to maintain the working space under negative pressure.
Get Best QuoteRequest A Callback
Laminar Air Flow  Reverse

Laminar Air Flow Reverse

Get Latest Price

Product Brochure

laminar Air Flow Reverse
Get Best QuoteRequest A Callback
Reverse  Laminar Air  Flow Booth

Reverse Laminar Air Flow Booth

Get Latest Price

Product Brochure

Reverse laminar Air Flow Booth
Get Best QuoteRequest A Callback
Reverse  Laminar Air Flow  Rlaf

Reverse Laminar Air Flow Rlaf

Get Latest Price

Product Brochure

Reverse laminar Air Flow Rlaf
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© SN Global Technologies. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.